Bathroom Vanity FAQ
Q: What are the load-bearing requirements for wall-mounted cabinets and floor-standing cabinets?
A: When installed at a height of 1000mm, wall-mounted cabinets support a load of 98kg (static hold for 10 minutes); floor-standing cabinets support a load of 98kg.
Q: The drawer or sliding mechanism is not moving smoothly or is getting stuck?
A:
(1) Apply lubricant to the sliding parts of the rails or hinges.
(2) Check if the rails or hinges have become loose during installation or transport; adjust their installation position or the tightness/clearance as needed.
Q: How do I repair accidental scratches on the cabinet surface?
A: Small scratches can be repaired using a touch-up paint pen.
Q: What is the required wall thickness for installing the bathroom cabinet?
A: The wall thickness must be at least 60mm.
Q: What is the water absorption rate of the bathroom cabinet?
A: For the wooden components on the product's exterior, the thickness swelling rate after 24 hours of water absorption is ≤10%.
Q: What if a white heat mark is accidentally left on the bathroom cabinet countertop?
A: Wipe the area with a soft cloth dampened with alcohol, floral water (toilet water), kerosene, or strong tea.
Q: What if there are water stains on the bathroom cabinet?
A: Place a damp cloth over the stain, then carefully press the cloth with an iron several times; the stain should disappear.
Q: What if the paint finish on the bathroom cabinet gets scratched?
A: If the wood underneath is not damaged, apply a wax crayon or pigment that matches the cabinet's color to the scratch to cover the exposed base color, then apply a thin layer of clear nail polish over it.
Q: How do I repair scratches or dents on the bathroom cabinet?
A: Use a cotton ball or paintbrush to apply shoe polish of a matching color to the surface of the cabinet.
Q: What if the bathroom cabinet has cracks?
A: Mix putty with pigment and fill the crack until flush to ensure durability; ensure the mixture matches the original paint color to avoid leaving visible marks or blemishes.
Q: What is the required wall thickness for installing the bathroom cabinet?
A: The wall thickness must be at least 60mm to ensure the cabinet is securely mounted and can support the necessary weight.
Q: Why does the washbasin crack when hot water is poured into it?
A:
(1) Cold cracking: This primarily occurs at the interface where two mold sections meet. If the interface is not properly treated during manufacturing, cracks can form; sudden thermal expansion or contraction can then cause the basin to split.
(2) Thermal bursting: Cracking caused by uneven heating between the ceramic body and the glaze layer.
(3) Ceramics have low thermal conductivity; pouring hot water causes rapid localized expansion, leading to cracking—a phenomenon that occurs more frequently in winter.

